Zetec

REMOVAL







1. Remove the air cleaner outlet tube.







2. Disconnect the Throttle Position (TP) sensor electrical connector.







3. Disconnect the Camshaft Position (CMP) electrical connector.







4. Disconnect the Idle Air Control (IAC) valve electrical connector.







5. Disconnect the fuel injection wiring harness electrical connector.







6. Disconnect the oil pressure switch electrical connector.







7. Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.







8. Disconnect the fuel injector electrical connectors.
9. Remove the fuel injection wiring harness.

INSTALLATION
1. To install, reverse the removal procedure.