Headlamp: Adjustments

1. Place the vehicle on a level surface and make sure that the tire pressures are to specification and that the vehicle is not abnormally laden.
2. Set the measuring screen of the beam setting equipment to the following headlamp adjustment value (X): X = 12 cm/10 m = 0 degrees, 41 minutes = 1.2%.







3. Alignment screws for the headlamp adjustment.
1. Vertical alignment screw.
2. Horizontal alignment screw.







4. Adjust the headlamp so that the boundary line touches the horizontal line.

NOTE: Switch on the low beam.







5. Adjust the headlamp so that the rising line of the boundary line lies at the intersection of horizontal line and the 15 degrees line (left-hand drive vehicle shown).

NOTE:
^ Some scattered light from the low beam may lie above the 15 degrees line.
^ Readjustment of the vertical axis may be necessary following adjustment of the horizontal axis.