Torque Converter: Specifications

Converter Relief Valve Spring 1
Converter Turbine Shaft Seal (Inner) Diameter mm (in) 20(0.787)
Torque Converter Stall Torque Ratio 2.420
Torque Converter Stator Support O-Ring (Inner) Diameter mm (in) 82.9 (3.264)
Torque Converter to Converter Housing Installed Height mm (in) 13.6 (0.535)
Torque converter to engine flywheel nuts 35-49 Nm (26-36 ft. lbs.)
Torque converter stator support bolts 11-13 Nm (96-121 inch lbs.)

1 Refer to procedure for spring specifications.