| Connecting Rod Bearings | Clearance to Crankshaft (inch) | (0.0008-0.0026) |
| Bearing Wall Thickness (Std.) (inch) | (0.0581-0.0586) |
| Clearance of Crankshaft | Without Cylinder Head (inch) | Desired - (0.0018-0.0026) |
| | Allowable - (0.0018-0.0034) |
| With Cylinder Head (inch) | Desired - (0.0011-0.0019) |
| | Allowable - (0.0011-0.0027) |
| Bearing Wall Thickness (inch) | | (0.0833-0.0838) |
| Connecting Rod | Piston Pin Bore Diameter (inch) | (0.8098-0.8114) |
| Crankshaft Bearing Bore Diameter (inch) | (1.8460-1.8468) |
| Out-of-Round Limit-Piston Pin Bore (inch) | (0.0003) |
| Taper Limit Piston Pin Bore (inch/inch) | (0.00015/1) |
| Length (Center to Center) (inch) | (5.193-5.196) |
| Out-of-Round Limit-Bearing Bore (inch) | (0.0004) |
| Taper Limit-Bearing Bore (inch) | (0.0004) |
| Alignment Bore-to-Bore (max. Differential) | Twist (inch) | (0.002) |
| Bend (inch) | (0.0015) |
| Side Clearance (Assembled to Crank) | Standard (inch) | (0.004-0.011) |
| Service Limit (inch) | (0.014) |