Procedures

REMOVAL
1. Remove the two upper quarter panels.







2. Remove the two windshield side garnish mouldings.







3. Remove the two sun visors.
1 Remove the six screws.
2 Position the sun visors aside.
- If equipped, disconnect the electrical connectors.







4. Remove the two pin-type retainers.







5. Remove the headliner.
1 Disconnect the electrical connector.
2 Release the wiring harness locators.
3 Remove the headliner.

CAUTION: Folding the headliner will result in damage to the headliner.

INSTALLATION







1. Install the headliner.
1 Position the headliner.
- Apply Headliner Adhesive F1VY-19562-A meeting Ford specification WSS-M2G355-B, to the headliner using the existing pattern.
2 Connect the electrical connector.
3 Engage the wiring harness locators.

CAUTION: Folding the headliner will result in damage to the headliner.






2. Install the two pin-type retainers.







3. Install the two sun visors.
1 Position the sun visors.
- If equipped, connect the electrical connectors.
2 Install the screws.






4. Install the two windshield side garnish mouldings.
5. Install the two upper quarter trim panels.