Torque Specifications
Cylinder HeadsInstall the cylinder head gaskets.
NOTE: The LH is shown the RH is similar.
Tighten the bolts in six stages in the sequence shown.
^ Stage 1: Tighten to 40 Nm (30 ft. lbs.).
^ Stage 2: Tighten an additional 90 degrees.
^ Stage 3: Loosen the bolts a minimum of one full turn.
^ Stage 4: Tighten to 40 Nm (30 ft. lbs.).
^ Stage 5: Tighten an additional 90 degrees.
^ Stage 6: Tighten an additional 90 degrees.
Camshaft Bearing Cap Bolts
Tighten to 10 Nm (89 in.lb).
Intake Manifold
Tighten to 25 Nm (18 ft.lb).
LH Exhaust Manifold
Tighten to 20 Nm (15 ft.lb).
RH Exhaust Manifold
Tighten to 20 Nm (15 ft.lb).