Piston
| Diameter | 0.0010 in Measured at 31.5 mm from top of block. Measured at 43 mm from top of piston, at 90 degrees to the piston pin. h If applicable, measured vertically, +0.030 - 0.050 mm (0.001 - 0.002 inch) measured horizontally (oval pin bore) | |
| Coded Red 1 | 3.55-3.551 in | |
| Coded Blue 2 | 3.55-3.551 in | |
| Coded Yellow 3 | 3.551-3.552 in | |
| Coated piston-to-bore clearance | (-0.002)/+0.001 in | |
| Ring groove width | Compression (Top) | 0.06-0.061 in |
| Compression (Bottom) | 0.06-0.061 in | |
| Oil ring | 0.12-0.12 in |