Connecting Rod
| Pin Bore Diameter | 22.012-22.024 mm | |
| Crankshaft Bearing Bore Diameter | 56.866-56.886 mm | |
| Length (Center-to-Center) | 150.7 mm | |
| Alignment (Bore-To-Bore Max. Diff.) Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline. | Twist | 0.050 mm per 25 mm |
| Bend | 0.038 mm per 25 mm | |
| Side Clearance (Assembled to crank) | Standard | 0.15-0.45 mm |
| Service Limit | 0.50 mm MAX |