Fuel Pump: Service and Repair

Wrench, Fuel Tank Sender Unit:

SPECIAL TOOL(S)

REMOVAL
1. Remove the fuel tank.







2. Disconnect the fuel supply line from the fuel pump module.
1. Hold the fuel pump connector.
2. Disconnect the fuel supply line from the fuel pump module.







3. Using the special tool, remove the locking ring.

CAUTION: Make sure the float or arm are not damaged while removing the fuel pump module.







4. Remove the fuel pump module
1. Rotate the module counterclockwise.
2. Lift the module from the fuel tank.

INSTALLATION

NOTE: Install a new fuel pump module seal and make sure it is seated correctly on the fuel tank prior to tightening the locking ring.







1. To install, reverse the removal procedure.
2. Carry out an evaporative emission system leak test. Testing and Inspection