Front Seat

REMOVAL
1. Disconnect the battery ground cable.
^ Wait one minute.

WARNING: WAIT AT LEAST ONE MINUTE AFTER DISCONNECTING THE BATTERY GROUND CABLE BEFORE DISCONNECTING ANY SUPPLEMENTAL RESTRAINT SYSTEM ELECTRICAL CONNECTORS. FAILURE TO FOLLOW THIS WARNING COULD CAUSE PREMATURE DEPLOYMENT AND MAY RESULT IN PERSONAL INJURY.

2. Move the seat fully rearwards.







3. Remove the outboard seat slide trim cover.







4. Remove the front bolts.
5. Move the seat fully forwards.







6. Remove the rear bolts.







7. Disconnect the 5-way under seat electrical connector.

INSTALLATION












1. To install, reverse the removal procedure.