Without 3-Door and Wagon

DISASSEMBLY
1. Lift the rear seat cushion.







2. Detach the center rear safety belt lower anchor.







3. Remove the rear seat backrest.
4. Remove the head restraints.







5. Remove the head restraint guides.
1. Using a suitable screwdriver, depress the locking tang.
2. Lift the head restraint guide.
6. Remove the rear seat backrest carpet.







7. Detach the backrest cover retaining strip.







8. Install the safety belt webbing retainer.

NOTE: The safety belt webbing retainer is supplied with new safety belts. Do not use any other retaining method.







9. Detach the center rear safety belt guide.
1. Move the safety belt webbing to access the retainers.
2. Drill out the rivets.







10. Remove the center safety belt guide.







11. Detach the center rear safety belt webbing from the seat cover and foam pad.







12. Remove the seal cover and foam pad.







13. Cut the seat cover from the foam pad.
^ Remove the twelve hog rings.

ASSEMBLY

















1. To assemble, reverse the disassembly procedure.