Vehicles With Automatic Transaxle
REMOVALAll vehicles
1. Detach the front of the center console from the floor panel bracket.
- Remove the cup holder insert.
Vehicles with traction control
2. Detach the gearshift lever trim panel from the center console.
- Detach the clips.
3. Remove the gearshift lever trim panel.
- Disconnect the electrical connector.
Vehicles without center console armrest
4. Remove the rear cup holder insert.
5. Detach the rear of the center console from the floor panel bracket.
Vehicles with center console armrest
6. Detach the rear of the center console from the floor panel bracket.
7. Remove the armrest trim panel.
8. Remove the armrest.
- Remove the screws.
All vehicles
9. Detach the boot from the parking brake control.
10. Fully raise the parking brake control lever.
11. Remove the floor console.
1. Place the gearshift in the NEUTRAL position.
2. Raise the front of the center console.
12. Place the gearshift in the PARK position.
INSTALLATION
1. To install, reverse the removal procedure.