| Connecting Rod Bearing | Clearance to Crankshaft | | 0.0008-0.0026 |
| Bearing Wall Thickness | | 0.0581-0.0586 |
| Clearance of Crankshaft - Without Cylinder Head | Desired | 0.0018-0.026 |
| | Allowable | 0.0018-0.0034 |
| Clerance of Crankshaft - With Cylinder Head | Desired | 0.00011-0.0019 |
| | Allowable | 0.0011-0.0027 |
| Bearing Wall thickness | | 0.833-0.0838 |
| Connecting Rod | Piston Pin Bore Diameter | | 0.8098-0.8114 in |
| Crankshaft bearing bore diameter | | 1.8460-1.8468 in |
| Out-of-Round limit piston pin bore | | 0.0003 in |
| Taper limit piston pin bore | | 0.00015/1 in |
| Length (Center to Center) | | 5.193-5.196 in |
| Out-of-Round limit bearing bore | | 0.0004 in |
| Taper limit bearing bore | | 0.0004 |
| Alignment Bore-to-Bore | Twist | 0.002 |
| | Bend | 0.0015 |
| Side Clearance | Standard | 0.004-0.011 |
| | Service Limit | 0.014 |