Coil Pack

REMOVAL







1. Disconnect the electrical connector from the ignition coil.







2. Disconnect the spark plug wires by squeezing the locking tabs and twisting while pulling upward.

CAUTION:
^ Spark plug wires must be connected to the correct ignition coil terminal. Mark spark plug wire locations before removing them.
^ It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wire.







3. Remove the ignition coil.
^ Remove the four bolts.
^ Wipe the ignition coil towers with a clean cloth dampened with soap and water.

INSTALLATION
1. To install, reverse the removal procedure.