Push Connect Fittings

Fuel Line Disconnect Tool:

SPECIAL SERVICE TOOL(S)

DISCONNECT

WARNING:
^ DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED, RESULTING IN POSSIBLE PERSONAL INJURY.
^ FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN THE ENGINE IS NOT RUNNING. BEFORE SERVICING OR DISCONNECTING ANY OF THE FUEL LINES OR FUEL SYSTEM COMPONENTS, THE FUEL SYSTEM PRESSURE MUST BE RELIEVED TO PREVENT ACCIDENTAL SPRAYING OF FUEL, CAUSING PERSONAL INJURY OR A FIRE HAZARD.

1. Relieve the fuel system pressure. For additional information, refer to Fuel Pressure Release.







2. Disconnect the safety clip from the male hose.







3. Install the Fuel Line Disconnect Set and push into the fitting.







4. Separate the fittings.
^ Clean and inspect the fittings for damage.

CONNECT







1. Connect the fitting.
^ Align the tube to the fitting and push until you hear a click.

NOTE: Lubricate the tube end with clean Super Premium SAE 5W-30 motor oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G to ease assembly.







2. Pull on the fitting to make sure it is fully engaged, then install the safety clip.