RH

Removal
1. Remove the engine air cleaner outlet tube.





2. Disconnect the crankcase vent hose.





3. Disconnect the transducer vacuum hoses.





4. If equipped, remove the exhaust air supply valve assembly.
1 Loosen the tube nut.
2 Disconnect the air tube.
3 Disconnect the vacuum tube.
4 Remove the nuts.





5. Disconnect the Exhaust Gas Recirculation (EGR) tube.





6. Remove the EGR tube.





7. Position the spark plug wires aside.
8. Remove the throttle body.





9. Remove the RH valve cover.

Installation














1. To install, reverse the removal procedure.
- Install a new valve cover gasket as necessary.