Harmonic Balancer - Crankshaft Pulley: Service and Repair

Special Tools:

Removal
1. Remove the drive belt.





2. Remove the radiator coolant recovery reservoir.
3. Raise the vehicle on a hoist.





4. Remove the crankshaft pulley bolt.





5. Using the special tool, remove the crankshaft pulley.

Installation





1. Apply a bead of sealant to the keyway in the crankshaft damper and use the special tool to install the crankshaft pulley.
- Use Silicone Gasket and Sealant F7AZ-19554-EA or equivalent meeting Ford specification WSE-M4G323-A4.





2. Install the crankshaft bolt.
3. Lower the vehicle.





4. Install the radiator coolant recovery reservoir.
5. Install the drive belt.