Without Automatic Transmission

REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Apply the parking brake.
3. If equipped, remove the manual transmission shift knob.







4. Remove the floor console finish panel.
- Disconnect the electrical connectors.
5. Open the floor console glove compartment.







6. Remove the floor console glove compartment bumpers.







7. Remove the floor console glove compartment storage bin.
1 Remove the screws.
2 Remove the floor console glove compartment storage bin.







8. Disconnect the floor console electrical connector.







9. Remove the floor console.
1 Remove the screws.
2 Remove the floor console.

INSTALLATION
1. To install, reverse the removal procedure.