Pump Assembly

Special Tools:

Disassembly





1. Remove the bolts and the top portion of the pump.





2. Inspect the lower portion of the pump and gear pocket for nicks, scratches, gouges or wear.





3. Remove the pump seal.





4. Inspect the upper portion of the pump for nicks, scratches or gouges.





5. Inspect the pump gears of nicks, scratches or gouges.

Assembly

1. NOTE: The smaller gear has a recess on both sides, the smaller recess must face no.





Lubricate the gears and thrust washers with clean Automatic Transmission Fluid or equivalent meeting Ford specification MERCON(R) V.





2. Install the special tool, install the pump seal.
- Lubricate the gears and thrust washers with Automatic Transmission Fluid Automatic Transmission Fluid or equivalent meeting Ford specification MERCON(R) V.





3. Install the top portion of the pump and the bolts.