| Head gasket surface finish roughness height (CLA) | 3.8 - 2.0 |
| Head gasket surface finish roughness height cutoff | 0.8 |
| Dowel height chamfer | 0.8 x 30 deg |
| Dowel height chamfer total | 12.5 mm |
| Cylinder bore diameter | 84.8 |
| Piston to cylinder bore clearance | 0.020 - 0.040 mm |
| Surface finish (RA) each bore min. | 15 - 38 |
| Average of all bores of a cylinder block (Ra) min. | 20 - 30 |
| Out-of-round limit | 0.025 |
| Tappet limit | 0.013 |
| Main bearing bore diameter @ 30 degrees PF Bearing Cap P/L | 62.2835 - 62.3145 |
| Main bearing bore diameter other than above | 62.2935 +/- 0.0100 |