Throttle Cable/Linkage: Service and Repair

REMOVAL







1. Remove the air cleaner outlet tube.







2. Detach the accelerator cable.
1. Detach the accelerator cable from the bracket.
2. Detach the accelerator cable.







3. Remove the footwell trim panel.







4. Disconnect the accelerator cable from the pedal.







5. Attach a draw cord to the accelerator cable to aid installation.
6. Remove the accelerator cable.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: The rubber grommets must be installed into the bulkhead and throttle body bracket before the accelerator cable is installed into the grommets.