Scan Tool Diagnostics

1. If the concern remains after the inspection, connect the scan tool to the Data Link Connector (DLC) located beneath the instrument panel and select the vehicle to be tested from the scan tool menu. If the scan tool does not communicate with the vehicle:
^ Check that the program card is installed correctly.
^ Check the connections to the vehicle.
^ Check the ignition switch position.
2. If the scan tool still does not communicate with the vehicle, refer to the scan tool manual.
3. Carry out the DATA LINK DIAGNOSTIC TEST. Test A: Data Link Diagnostic Test
4. If the DTCs retrieved are related to the concern, go to the instrument cluster Diagnostic Trouble Code (DTC) Index. Trouble Code Diagnostic Charts - Instrument Cluster
5. If no DTCs related to the concern are retrieved, proceed to the instrument cluster Dealer Test Mode to continue diagnostics. Component Tests and General Diagnostics