| Connecting rod bearings clearance to crankshaft | 0.020 - 0.065 Millimeter (mm) |
| Bearing wall thickness (std.) | 1.476 - 1.488 Millimeter (mm) |
| Clearance of crankshaft without cylinder head desired | 0.0457 - 0.0660 Millimeter (mm) |
| Clearance of crankshaft without cylinder head allowable | 0.0461 - 0.0859 Millimeter (mm) |
| Clearance of crankshaft with cylinder head desired | 0.0279 - 0.0483 Millimeter (mm) |
| Clearance of crankshaft with cylinder head allowable | 0.0276 - 0.0674 Millimeter (mm) |
| Bearing wall thickness | 2.117 - 2.129 Millimeter (mm) |
| Connecting rod piston pin bore diameter | 20.570 - 20.610 Millimeter (mm) |
| Crankshaft bearing bore diameter | 46.89 - 46.91 Millimeter (mm) |
| Out-of-round limit - piston pin bore | 0.008 Millimeter (mm) |
| Taper limit piston pin bore | 0.0038/25.4 Millimeter (mm) |
| Length (center to center) | 131.905 - 131.975 Millimeter (mm) |
| Out-of-round-limit - bearing bore | 0.010 Millimeter (mm) |
| Taper limit - bearing bore | 0.010 Millimeter (mm) |
| Alignment bore-to-bore (max. differential) twist | 0.05 Millimeter (mm) |
| Alignment bore-to-bore (max. differential) bend | 0.038 Millimeter (mm) |
| Side clearance (assembled to crank) standard | 0.092 - 0.268 Millimeter (mm) |
| Side clearance (assembled to crank) service limit | 0.356 Millimeter (mm) |