Muffler: Service and Repair

Removal

WARNING: The normal operating temperature of the exhaust system is very high. Never attempt to repair any part of the system until it has cooled. Be especially careful when working around the three way catalytic converter. The temperature of the three way catalytic converter rises to a high level after only a few minutes of engine operation.

1. Remove the rear shock absorbers.





2. Remove the dual converter assembly flange nuts.





3. Remove the exhaust pipe assembly from the rear exhaust hanger insulator.





4. Remove the exhaust hanger insulator.





5. Remove the muffler.


Installation





1. CAUTION: Do not use oil or grease-based lubricants on insulators as they deteriorate the rubber.

NOTE: A soap-and-water solution will ease installation of the exhaust hanger insulators.

To install, reverse the removal procedure.