Connecting Rod
| Clearance to Crankshaft | Desired | 0.001-0.002 Inch (in) |
| Allowable | 0.00098-0.00197 Inch (in) | |
| Bearing Wall Thickness | 0.0756-0.0757 Inch (in) | |
| Pin Bore Diameter | 0.86661-0.86708 Inch (in) | |
| Crankshaft Bearing Bore Diameter | 2.23881-2.23960 Inch (in) | |
| Length (Center-to-Center) | 5.933 Inch (in) | |
| Alignment (Bore-to-Bore Max.Diff.) Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline. | Twist | 0.00197 per 0.9843 Inch (in) |
| Bend | 0.00150 per 0.9843 Inch (in) | |
| Side Clearance (Assembled to Crank) | Standard | 0.005-0.019 Inch (in) |
| Service Limit | 0.01969 Inch (in) | |
| Connecting Rod Bolts | Stage 1 | 18 Foot Pound-Force (ft.lb) |
| Stage 2 | 30 Foot Pound-Force (ft.lb) | |
| Stage 3 | 90 Degrees |