Compressor to Condenser

REMOVAL
1. Disconnect the battery.
2. Recover the refrigerant.







3. Disconnect the electrical connector.







4. Remove the pressure cut-off switch.
5. Raise the vehicle.







6. Remove the A/C muffler bracket nut.







7. Disconnect the fitting at the compressor.







8. Disconnect the fitting at the condenser.
9. Remove the compressor to condenser tube.

INSTALLATION
1. To install, reverse the removal procedure.
Refrigerant Oil Addition

- Lubricate the O-ring seal with PAG Compressor Oil, YN-12c, F7AZ-19589-DA or equivalent meeting Ford specification WSH-M1C231-B.