Cylinder Block Assembly
| Head Gasket Surface Finish Overall Flatness | 0.003 | |
| Head Gasket Surface Finish Roughness Height (CLA) | 0.15 - 0.08 | |
| Roughness Height Cutoff | 0.8 | |
| Dowel Height Chamfer | 0.8 x 30 | |
| Total | 12.5 | |
| Cylinder Bore Diameter | 3.34 Inch (in) | |
| Piston to Cylinder Bore Clearance | 0.0008 - 0.0016 | |
| Surface Finish (RA) Each Bore Min. | 15 - 38 | |
| Out-of-Round Limit | 0.001 Inch (in) | |
| Taper Limit | 0.0005 | |
| Main Bearing Bore Diameter | at 30 deg PF Bearing Cap P/L | 2.4521 - 2.4533 Inch (in) |
| Other than above | 2.4525 +/- 0.00039 Inch (in) |