Attachment III - Technical Information

AFFECTED VEHICLES:
CERTAIN 1999 MODEL YEAR CROWN VICTORIA POLICE INTERCEPTORS BUILT BEFORE NOVEMBER 20, 1998

SERVICE PROCEDURE

1. Check the PCM calibration as follows:

^ Use the N.G.S., access PCM, pick "MODULE I.D." to determine necessary information.





^ Cross reference data to information below to determine the calibration level.

2. If the calibration is not 9VNA-AAD, reflash Powertrain Control Module (PCM) to 9VNA-AAD (current R level) using one of the following two (2) methods:

^ Service Bay Diagnostic System (SBDS).

^ Service Bay Technical System (SBTS) and the New Generation STAR (NGS) Tester with Rotunda flash cable (007-00531) and Rotunda flash card (007-00532).

3. Obtain and prepare the Authorized Modifications Label. Write the modification completed, your P & A Code, date of repair and the recall program type and program number as shown below.





4. Apply label to clear area of the upper radiator support.