Cylinder Head Assembly
| Bore Diameter | Intake | Min | 39.940 |
| Max | 39.965 | ||
| Exhaust | Min | 34.940 | |
| Max | 34.965 | ||
| Gasket Surface Flatness | Total | 0.04/26 0.08/156 0.15 | |
| Head Face Surface Finish | 0.2/2.5 0.8 | ||
| Heat Shield To Cylinder Head | M6 | 89 | |
| Heat Shield To Cylinder Head And Exhaust Manifold | M8 | 12 | |
| VCT Oil Feed Flange To Cylinder Head | 89 | ||
| Camshaft Position Sensor To Cylinder Head | 80 | ||
| Cylinder Head Bolts The cylinder head bolts must not be tightened more than once. | Stage 1 | 20 | |
| Stage 2 | 40 | ||
| Stage 3 | 90 Degrees | ||
| Blanking Plug, Cylinder Head Oil Channel | 11 | ||
| EI Ignition Coil Bracket To Cylinder Head | 15 | ||
| Power Steering Pump Mounting Plate To Cylinder Head | 15 | ||
| Engine Lifting Eye To Cylinder Head | 15 |