Installation

1. Clean water pump-to-water pump housing gasket sealing surfaces.
2. If removed, install water pump belt idler pulley and retaining bolt to water pump housing. Tighten retaining bolt to 10-16 Nm (89-141 inch. lbs.).
3. Lubricate water pump inlet hose, outlet hoses and O-ring with Premium Engine Coolant E2FZ-19549-AA or equivalent meeting Ford specification ESE-M97B44-A. Install water pump inlet and outlet hoses onto water pump housing. Install water pump outlet hose spring clamp securely.
4. Place Owing between water pump housing and LH cylinder head.
5. Install bouts retaining water pump housing to LH cylinder head. Tighten two retaining bolts at water inlet to 8-12 Nm (71-106 inch. lbs.). Tighten two remaining retaining bolts to 18-28 Nm (14-20 ft. lbs.).
6. Install water thermostat, oil cooler return tube gasket and water hose connection to water pump housing with two retaining bolts. Tighten to 8-12 Nm (71-106 inch. lbs.).
7. Install throttle body return and supply hoses, heater core return hose and oil cooler return hose to water pump.
8. Install water pump drive belt. Carefully release drive belt tensioner.
9. Fill engine cooling system.
10. Install engine appearance cover.
11. Run engine and check for coolant leaks.