Removal

1. Raise vehicle on hoist.
2. Remove dual converter Y pipe.
3. Remove oil pan drain plug and drain engine oil from engine.
4. Reinstall oil pan drain plug with a new oil pan drain plug gasket and tighten to 20-34 Nm (15-25 ft. lbs.).
5. Remove oil pan retaining bolts from transaxle housing.
6. Remove oil pan retaining bolts from lower cylinder block.
7. Remove two nuts retaining oil pump screen cover and tube to the oil pump.
8. Remove two nuts retaining oil pump screen cover and tube to the oil pan baffle.
9. Remove two nuts retaining oil pump screen cover and tube to the oil pump.

(Part 1 Of 2):

(Part 2 Of 2):

10. Remove oil pump screen cover and tube and oil pump inlet tube gasket. Discard oil pump inlet tube gasket.