Countershaft: Service and Repair

Special Tools:

DISASSEMBLY
1. Using a Press and Pinion Bearing Cone Remover T71P-4621-B, remove the countershaft bearing cone and roller.
2. Using a Press and Bearing Pulling Attachment D84L-1123-A or equivalent, remove the output shaft bearing.

ASSEMBLY
1. Using a press, suitable spacer, Remover/Replacer Tube T75L-7025-C and Axle Bearing/Seal Plate T75L-1165-B, install countershaft pilot bearing.
2. Using a press, suitable spacer, Remover/Replacer Tube T75L-7025-C, Axle Bearing/Seal Plate T751-1165-B and Countershaft Front Bearing Replacer T77J-7025-L, install the output shaft bearing.