Climate Control Switches

REMOVAL
1. Remove climate control assembly.
2. Remove knob.
3. Disconnect wire connector from heater blower motor switch or wire connector and vacuum bundle from function selector switch.
4. Remove retaining screw and heater blower motor switch or function selector switch.

INSTALLATION
1. Position heater blower motor switch or function selector switch on heater control. Make sure retaining tabs on heater blower motor switch or function selector switch are engaged in slots. Install retaining screw.
2. Connect wire connector to heater blower motor switch or wire connector and vacuum bundle to function selector switch.
3. Install knob.
4. Install heater control as an assembly in instrument panel.
5. Check system for proper operation.