Driver or Passenger Seat Back
REMOVAL1. Remove front seat.
2. Disengage front seat back cover to gain access to front seat back latch upper cover.
3. Remove two screws retaining front seat back latch upper cover to front seat back frame.
4. Remove two bolts retaining front seat back latch to front seat back frame.
5. Remove two screws retaining front seat back latch lower cover to front seat cushion frame and spring.
6. Remove two bolts retaining front seat back latch to front seat cushion frame and spring and remove front seat back latch.
7. Remove shoulder pivot bolt from inboard side of seat retaining seat back to seat cushion.
8. Remove seat back.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten inboard pivot bolt to 19-27 Nm (14-19 lb-ft).
3. Tighten front seat back frame bolts to 22-32 Nm (17-23 lb-ft).
4. Tighten front seat back latch-to-front seat cushion frame and spring bolts to 47-63 Nm (35-46 lb-ft).
5. Check the restraint system for proper operation.