Fuel Injector: Service and Repair

REMOVAL
1. Perform pre-service procedures and fuel pressure release. Service and Repair
2. Carefully remove fuel charging wiring from individual fuel injectors at the connectors as required.

Fuel Injector:

3. Remove fuel injection supply manifold.







4. Remove fuel injectors from the fuel injection supply manifold by grasping fuel injector body and pulling up while gently rocking fuel injector from side to side.
5. Inspect fuel injector O-rings (two per fuel injector) for signs of deterioration. Replace as required.







6. Inspect fuel injector end cap, body and washer for signs of dirt and deterioration.

INSTALLATION

1. Lubricate new fuel injector O-rings with clean engine oil meeting Ford specification WSS-M2C153-G.

CAUTION: Never use silicone grease. Silicone grease will clog the fuel injectors.

2. Install fuel injectors into fuel injection supply manifold using a light, twisting-pushing motion.
3. Install fuel injection supply manifold.
4. Connect fuel charging wiring to fuel injectors.
5. Perform post-service procedures. Service and Repair