Convertible Top Stay Pad

REMOVAL
1. Remove roof outside cover and back window glass.

NOTE: Mark assembly so installation will be in the same position. If staples are removed from the folding top stay pad case, they must be replaced.

2. Remove staples retaining folding top stay pad case to the folding top header pad and folding top bow, folding top front number 3 bow and folding top rear number 4 bow.
3. Position folding top stay pad cases onto folding top linkage assembly.
4. Staple folding top stay pad cases to tacking strips on the folding top header pad and folding top rear number 4 bows.

INSTALLATION
1. Install back window glass.
2. After back window glass is installed, staple folding top stay pad case to folding top bow number 2 and folding top front number 3 bow. Staple folding top bow to second line on folding top stay pad case. Staple folding top front number 3 bow to third line on folding top stay pad case.