Active Anti-Theft Alarm System (RAP)

1. Verify the customer's concern by operating the anti-theft alarm system to duplicate the condition.
2. Inspect to determine if one of the following mechanical or electrical concerns apply:

VISUAL INSPECTION CHART

Mechanical
^ Damaged luggage compartment door lock cylinder.

Electrical
^ Open fuses:
- Power Distribution Box (Engine Compartment): Horn/Fog/DRL (20A)
^ Fuse junction panel:
- Fuse 6 (15A)
- Fuse 16 (20A)
^ Loose connections.
^ Corroded connections.

3. If the inspection reveals obvious concern(s) that can be readily identified, service as required.
4. If the concern(s) remains after the inspection, determine the symptom(s) and Active Anti-Theft Alarm System (RAP)
5. NOTE: This quick test quickly provides the capability to identify a shorted to ground condition for the door lock cylinder switches, luggage compartment lock cylinder switch, ignition lock anti-theft switch or the associated circuits.

Perform the following anti-theft, on-board diagnostic test as follows:
a. Turn ignition switch to ACCESSORY.
b. Activate power door UNLOCK button five times within 10 seconds.
c. NOTE: Diagnostic mode will automatically cancel after two minutes or by turning key to OFF. Count the number of flashes of the anti-theft warning indicator lamp (repeats every 10 seconds).

Number of Flashes Action To Take
1 Door lock cylinder switches inputs normal.
2 Door lock cylinder switch input shorted. Repair/replace door lock cylinder switches and/or Circuit 25 (DG/P).
3 Luggage compartment lock cylinder switch input shorted. Repair/replace luggage lock cylinder switch and/or Circuit 23 (T/LG).
4 Both inputs shorted. Repair/replace door lock cylinder switches and/or Circuit 25 (DG/P). Repair/replace luggage compartment lock cylinder switch and/or Circuit 23 (T/LG).