Connecting Rod

GENERAL SPECIFICATIONS
Piston Pin Bore Diameter 21.959-21.979 mm (0.86453-0.86531 inches)
Crankshaft Bearing Bore Diameter 56.756-56.876 mm (2.23448-2.23921 inches)
Connecting Rod Length (Center-to-Center) 150.7 mm (5.9331 inches)
Alignment (Bore-To-Bore Max. Diff.)
Twist 0.050 per 25 mm (0.001969 per 0.98425 inches)
Bend 0.038 per 25 mm (0.001496 per 0.98425 inches)
Side Clearance (Assembled to Crank)
Standard 0.015-0.45 mm (0.00059-0.01772 inches)
Service Limit 0.50 mm (0.001969 inches) MAX


TORQUE SPECIFICATIONS
Connecting Rod Bolt
Tighten in 3 steps:
- Tighten to 20-25 Nm (15-18 Ft. Lbs.)
- Tighten to 40-45 Nm (30-33 Ft. Lbs.)
- Tighten an additional 90-120 degrees.