Compact Disc Player (CD): Service and Repair

REMOVAL
1. Remove luggage compartment trim cover.
2. Remove screws retaining compact disc changer mounting bracket to body.
3. Disconnect wiring connectors and remove digital audio compact disc changer from vehicle.
4. Remove screws retaining digital audio compact disc changer to compact disc changer mounting bracket.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten screws retaining digital audio compact disc player to compact disc player mounting bracket to 7-9 N.m (62-78 Lb-In). Tighten stud bolts to 26-34 N.m (20-25 Lb-Ft). Tighten nuts to 26-34 N.m (20-25 Lb-Ft).

CAUTION: Be sure the digital audio compact disc changer bracket screws are threaded no more than 4 mm (1/4 In) into the unit. Exceeding 4 mm will cause the unit to skip during use or be inoperable.