Cylinder Block Assembly

Camshaft Bearing Bore (I.D.)
No. 1 55.689-55.664 mm (2.192-2.191 inch)
No. 2 55.308-55.283 mm (2.177-2.176 inch)
No. 3 55.308-55.283 mm (2.177-2.176 inch)
No. 4 55.684-55.664 mm (2.192-2.191 inch)
Cylinder Head Surface (Deck)
Finish 2.0 @ 0.8, 5.5 @ 2.5
Flatness Deviation, Maximum 0.08 per 152.0 mm (0.003 per 6.00 inch)
Machine, Maximum 0.254 mm (0.010 inch)

Cylinder Bore
Diameter 96.80 mm (3.81 inch)
Out-Of-Round
Maximum 0.025 mm (0.001 inch)
Service Limit 0.050 mm (0.002 inch)
Surface Finish (RMS) 0.45-0.96
Taper, Maximum 0.050 mm (0.002 inch)
Main Bearing Bore
Diameter 68.905-68.885 mm (2.713-2.712 inch)
Tappet Bore
Diameter 22.268-22.230 mm (0.8767-0.8752 inch)