Connecting Rod

General
Bearing Bore 61.635-61.655 mm (2.4266-2.4274 inch)
Bend Limit 0.040 per 25 mm (0.0016 per inch)
+ Length 150.165-150.240 mm 5.912-5.915 inch)
Piston Pin Bore
Diameter 23.105-23.145 mm (0.9096-0.9112 inch)
Out Of Round, Limit 0.008 mm (0.0003 inch)
Taper, Limit 0.033 per 25 mm (0.013 per inch)
Side Clearance
Standard 0.11-0.49 mm (0.0047-0.01929 inch)
Limit (Maximum) 0.36 mm (0.014 inch)
Twist Limit 0.075 per 25 mm (0.003 per inch)

Tightening Specifications
Tighten nuts evenly, in three steps.
Step 1 Tighten to 40 Nm (30 ft. lbs.)
Step 2 Rotate an additional 90-120°


+ Center to center.