Removal and Installation

REMOVAL
1. Loosen engine air cleaner tube clamp at mass air flow sensor.
2. Remove air cleaner outlet tube from mass air flow sensor.
3. Disconnect engine control sensor wiring from mass air flow sensor.
4. Remove air cleaner element.
5. Remove engine air cleaner retaining nuts and Engine Air Cleaner (ACL).



INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten engine air cleaner retaining nuts to 2.0-2.4 Nm (18-21 lb in). Tighten engine air cleaner tube clamp to 2.3-3.4 Nm (21-30 lb in).