Replacement

REMOVAL
1. If necessary, remove oil bypass filter (6714).
2. Remove oil pump and filter body to engine front cover retaining bolts and remove oil pump and filter body (6603) from engine front cover (6019).
3. Inspect O-ring for distortion and wear. Replace if necessary.

INSTALLATION
1. Position oil pump and filter body on engine front cover and install retaining bolts.
2. Tighten four large engine front cover retaining bolts to 23-32 Nm (17-23 inch lbs.). Tighten two small retaining bolts to 8-11 Nm (71-97 inch lbs.).
3. If removed, reinstall oil bypass filter as described.