Geartrain

The manual transaxle has the following characteristics:
^ All gear pairs, including reverse, are synchronized helical gears.
^ Input and output shafts are mounted in taper roller bearings.
^ Two gear shaft assemblies are used:
a. Input shaft assembly
b. Output shaft assembly
^ Torque is transmitted from the engine through the transaxle to the final drive ring gear attached to the differential. Inside the differential assembly are two differential side gears and two differential pinion gears.
^ The front wheel driveshaft and joint are connected with the differential side gears by means of splines. As the differential turns in it rotates the front wheel driveshaft and joint and the wheels.