Crankshaft
DIMENSIONSOut-of-Round Limit 0.05 mm (0.002 in.)
Taper Limit 0.05 mm (0.002 in.)
Maximum Crankshaft Runout 0.015 mm (0.0005 in.)
Standard Diameter 61.938-61.995 mm (2.4385-2.4391 in.)
Minimum Diameter 61.931 mm (2.4382 in.)
0.25 mm (0.010 in.) Oversize 52.690-52.705 mm (2.0745-2.0749 in.)
Crankshaft End Play
Standard 0.080-0.282 mm (0.0032-0.0111 in.)
Maximum 0.30 mm (0.012 in.)
Crankshaft Thrust Washer Thickness
Standard 2.000-2.050 mm (0.0788-0.0807 in.)
0.25 mm (0.010 in.) Oversize 2.125-2.175 mm (0.0838-0.0856 in.)
0.50 mm (0.020 in.) Oversize 2.250-2.300 mm (0.0886-0.0905 in.)
Thrust Bearing Thickness
Standard 2.000-2.050 mm (0.0788-0.0807 inch)
0.25 mm (0.010inch) Oversize 2.125-2.175 mm (0.0838-0.0856 inch)
0.50 mm (0.020 inch) Oversize 2.250-2.300 mm (0.0886-0.0905 inch)
Crankpin Journal
Out-of-Round Limit 0.05 mm (0.002 in.)
Taper Limit 0.05 mm (0.002 in.)
Standard Diameter 52.940-52.955 mm (2.0843-2.0848 in.)
Main Journal Oil Clearance
Standard 0.037-0.057 mm (0.0015-0.0022 in.)
Maximum 0.064 mm (0.0025 in.)
Available Undersize Bearing 0.25 mm (0.010 in.)
Crankshaft Main Journal Oil Clearance
Standard 0.037-0.057 mm (0.0015-0.0022 in.)
Maximum 0.064 mm (0.0025 in.)
Available Undersize 0.25 mm (0.010 in.)
Connecting Rod Main Journal Oil Clearance
Standard 0.037-0.057 mm (0.0015-0.0022 inch)
Maximum 0.064 mm (0.0025 inch)
Available Undersize Bearing 0.25 mm (0.010 inch)