Connecting Rod

DIMENSIONS
Connecting Rod Journal
Out-of-Round Limit 0.05 mm (0.002 inch)
Taper Limit 0.05 mm (0.002 inch)
Connecting Rod Oil Clearance
Standard 0.023-0.043 mm (0.0009-0.0017 in )
Maximum 0.08 mm (0.0031 in.)
Piston Pin Bore Diameter 19.974-19.980 mm (0.7864-0.7866 in)
Crankshaft Bearing Bore Diameter 56.000-56.015 mm (2.2047-2.2053 in)
Side Clearance
Standard 0.178-0.330 mm (0 0070-0.0130 in.)
Maximum 0.40 mm (0.016 in.)
Crankshaft Bearing
Bore Diameter 56.000-56.015 mm (2.2047-2.2053 inches)
Side Clearance
Standard 0.178-0.330 mm (0.0070-0.0130 inch)
Maximum 0.40 mm (0.016 inch)

TORQUE SPECIFICATIONS
Connecting Rod Bearing Cap Bolts (1) 22-27 Nm (16-19 ft. lbs.)

(1)Tighten the Connecting Rod Bearing Cap Bolts to 22-27 Nm (16-19 ft. lbs.) then another 90 degrees ± 5 degrees.