Automatic Transaxle

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the engine air cleaner.





3. Remove the transmission shift cable from the manual control shift outer lever. Use a screwdriver or suitable tool to pry the shift cable and bracket from the manual control shift outer lever.
4. Disconnect the Transmission Range (TR) sensor electrical connector.
5. Remove the manual control shift outer lever nut and the manual control shift outer lever.
6. Remove the TR sensor bolts.
7. Remove the TR sensor.

INSTALLATION
1. Install the TR sensor.
2. Adjust the TR sensor. Refer to Adjustments.
3. Tighten the TR sensor bolts to 8-10 Nm (71-88 lb in).
4. Connect the TR sensor electrical connector.
5. Install the manual control shift outer lever and nut.
-Tighten the manual control shift outer lever nut to 32-46 Nm (24-33 ft lb).
6. Install the shift cable and bracket on the manual control shift outer lever.
7. Install the engine air cleaner.
8. Connect the battery ground cable.