Power Seat Switch: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.







2. If equipped with a six-way power seat, remove the two front trim screws. Remove the front trim.







3. Remove the adjuster handle screws. Remove the adjuster handle.







4. Remove the power seat knob.







5. Remove the front seat cushion side shield screw.
6. Lower the front seat cushion side shield.







7. Remove the four seat control switch screws.
8. Disconnect the seat control switch electrical connector.
9. Remove the seat control switch.







10. Remove the four lumbar/bolster support switch screws.
11. Disconnect the lumbar/bolster support switch electrical connector.
12. Disconnect the front seat back pad adjusting hose from the lumbar/bolster support switch.
13. Remove the lumbar/bolster support switch.

INSTALLATION
To install, reverse the removal procedure.