Output Shaft: Specifications

Clearance
Between 1st gear and Differential Drive
Nominal 0.05-0.28 mm (0.002-0.011 inch)
Maximum 0.33 mm (0.013 inch)
Between The 2nd Gear And The 3rd Gear.
Nominal 0.18-0.46 mm (0.007-0.018 inch)
Maximum 0.51 mm (0.020 inch)
Between The Speedometer Gear & Synchronizer Blocking Ring
Nominal 0.030-0.080 mm (0.0012-0.0031 inch)
Shaft diameter
1st 39.445-39.470 mm (1.5529-1.5539 inch)
2nd 34.945-34.970 mm (1.3758-1.3768 inch)
Inner gear diameter
1st 39.500-39.525 mm (1.5551-1.5561 inch)
2nd 35.000-35.025 mm (1.3780-1.3789 inch)