Input Shaft: Specifications

Clearance
Between The 3rd Gear And The 2nd Gear
Nominal 0.05-0.20 mm (0.002-0.007 inch)
Maximum 0.25 mm (0.010 inch)
Between The 4th Gear And The Bearing (4th Gear End)
Nominal 0.17-0.37 mm (0.007-0.015 inch)
Maximum 0.42 mm (0.017 inch)
Shaft diameter.
3rd 35.945-35.970 mm (1.4152-1.4161 inch)
4th 30.945-30.970 mm (1.2183-1.2193 inch)
Runout, Max. 0.050 mm (0.002 inch)
Fifth Sleeve Outer Diameter 33.945-33.970 mm (1.3364-1.3374 inches)
Inner Gear Diameter.
3rd 36.000-36.025 mm (1.4173-1.4183 inch)
4th 31.000-31.025 mm (1.2205-1.2215 inch)
5th 34.000-34.025 mm (1.3386-1.3396 inch)